Lifeboat Foundation

Cultured meat starts with the extraction of cells from an animal’s tissue, be it a pig, cow, chicken, fish, or any other animal we consume. The cell extraction doesn’t kill or even harm the animal. The cells are mixed with a cocktail of nutrients, oxygen, and moisture inside large bioreactors. Mimicking the environment inside an animal’s body, the bioreactors are kept at a warm temperature, and the cells inside divide, multiply, and mature. Waste products are regularly removed to keep the environment pure.

Once the cells have reached maturity—that is, grown into small chunks of muscle-like material—they’re harvested from the bioreactors to be refined and shaped into a final product. This can involve anything from extrusion cooking and molding to 3D printing and adding in artificial fat.

JBS says the factory it’s building in Spain will be able to produce more than 1,000 metric tons of cultivated beef per year, and could expand capacity to 4,000 metric tons per year in the medium term. That’s smaller than Believer Meats’ facility in the US, which will have an annual production capacity of 10,000 metric tons. But what’s noteworthy about the JBS factory is that it’s focused on producing beef.

The field of photonics has seen significant advances during the past decades, to the point where it is now an integral part of high-speed, international communications. For general processing photonics is currently less common, but is the subject of significant research. Unlike most photonic circuits which are formed using patterns etched into semiconductor mask using lithography, purely light-based circuits are a tantalizing possibility. This is the focus of a recent paper (press release, ResearchGate) in Nature Photonics by [Tianwei Wu] and colleagues at the University of Pennsylvania.

What is somewhat puzzling is that despite the lofty claims of this being ‘the first time’ that such an FPGA-like device has been created for photonics, this is far from the case, as evidenced by e.g. a 2017 paper by [Kaichen Dong] and colleagues (full article PDF) in Advanced Materials. Here the researchers used a slab of vanadium dioxide (VO₂) with a laser to heat sections to above 68 °C where the material transitions from an insulating to a metallic phase and remains that way until the temperature is lowered again. The μm-sized features that can be created in this manner allow for a wide range of photonic devices to be created.

What does appear to be different with the photonic system presented by [Wu] et al. is that it uses a more traditional 2D approach, with a slab of InGaAsP on which the laser pattern is projected. Whether it is more versatile than other approaches remains to be seen, with the use of fully photonic processors in our computers still a long while off, never mind photonics-accelerated machine learning applications.

A new high-performance metal alloy, called a superalloy, could help boost the efficiency of the turbines used in power plants and the aerospace and automotive industries.

Created using a 3D printer, the superalloy is composed of a blend of six elements that altogether form a material that’s both lighter and stronger than the standard materials used in conventional turbine machinery. The strong superalloy could help industries cut both costs and carbon emissions — if the approach can be successfully scaled up.

The challenge: In the world of materials science, the search for new metal alloys has been heating up in recent years. For over a century, we’ve depended on relatively simple alloys like steel, composed of 98% iron, to form the backbone of our manufacturing and construction industries. But today’s challenges demand more: alloys that can withstand higher temperatures and remain strong under stress, yet still be lightweight.

Crystal engineering is a green and convenient approach to designing desirable materials through rational manipulation of intermolecular interactions. We have reported the lesser reported sulfonate–pyridinium intermolecular interaction for the design and synthesis of organic co-crystals with improved features. Here in we report the utilization of the interaction to tune the solid-state luminescence of organic precursor naphthalene disulfonic acid (NDSA-2H). Organic salts of NDSA-2H are synthesized and characterized with three isostructural bipyridyl co-formers: 4-phenylpyridine (4-PhPy), 2-phenylpyridine (2-PhPy) and 2,2′-bipyridine (2,2-bpy). Structural investigation validates aggregation of organic acid and base co-formers through sulfonate–pyridinium synthon and proton transfer between them.

ETH Zurich researchers have developed a structure that can switch between stable shapes as needed while being remarkably simple to produce. The key lies in a clever combination of base materials.

Germanene – a two-dimensional, graphene-like form of the element germanium – can carry electricity along its edges with no resistance. This unusual behaviour is characteristic of materials known as topological insulators, and the researchers who observed it say the phenomenon could be used to make faster and more energy-efficient electronic devices.

Like graphene, germanene is an atomically thin material with a honeycomb structure. Like graphene, germanene’s electronic band structure contains a point at which the valence and conduction bands meet. At this meeting point, spin-orbit coupling creates a narrow gap between the bands within the material’s bulk, causing it to act as an insulator. Along the material’s edges, however, special topological states arise that bridge this gap and allow electrons to flow unhindered.

\r \r

Varda Space Industries aims to kickstart a new era of mass production of pharmaceuticals and other materials from Earth’s orbit.

A California-based startup co-founded by a SpaceX veteran, Varda Space Industries, announced it has successfully deployed its first satellite, W-Series 1, in orbit.

The company aims to kickstart the mass production of materials in space that either can’t be produced on Earth or are developed faster and with higher quality in microgravity conditions.

The technology was recently demonstrated by the Australian Army, where soldiers operated a Ghost Robotics quadruped robot using the brain-machine interface. Photo supplied by Australian Army. #Graphene

New technology is making mind reading possible with positive implications for the fields of healthcare, aerospace and advanced manufacturing.

Researchers from the University of Technology Sydney (UTS) have developed biosensor technology that will allow you to operate devices, such as robots and machines, solely through thought-control.

Continue reading “Mind-control robots a reality” »

Metals are typically used as active materials for negative electrodes in batteries. Recently, redox-active organic molecules, such as quinone-and amine-based molecules, have been used as negative electrodes in rechargeable metal–air batteries with oxygen-reducing positive electrodes. Here, protons and hydroxide ions participate in the redox reactions. Such batteries exhibit high performance, close to the maximum capacity that is theoretically possible.

Furthermore, using redox-active organic molecules in rechargeable air batteries overcomes problems associated with metals, including the formation of structures called ‘dendrites,’ which impact battery performance, and have negative environmental impact. However, these batteries use liquid electrolytes—just like metal-based batteries—which pose major safety concerns like high electrical resistance, leaching effects, and flammability.

Now, in a recent study published in Angewandte Chemie International Edition, a group of Japanese researchers have developed an all-solid-state rechargeable air battery (SSAB) and investigated its capacity and durability. The study was led by Professor Kenji Miyatake from Waseda University and the University of Yamanashi, and co-authored by Professor Kenichi Oyaizu from Waseda University.